Description

57ft Narrowboat FOR SALE, cruiser stern which is a on going project boat.
This boat was purchased by a work colleagues dad who
sadly passed away so he took over the project and has basically rebuilt the boat.
The works done are as follows:
Fully stripped out, steel cleaned and zinc primed, new insulation throughout (kingspan/celotex)
New plywood floor, ceiling & cabin sides lined, bulkheads to separate bedroom and bathroom.
New shower tray installed, Vetus macerator toilet and pump out tank (not installed)
All windows taken out and re-bedded on sikaflex drilled tapped and bolted
Two new side hatches, one each side.
Chimney sleeve welded in on roof.
Front doors, back doors and sliding hatch are new
Cabin roof and sides have been taken back to clean steel, zinc primed & undercoated.
Also top coated (some areas seem to be flaking so needs rubbing down and repainting)
Hull sides have been over plated above the water line in 5 mm.
The base plate and counter has been done in 6 mm.
The plating as been done in the last 6 months and has never been in the water.
The hull sides have been painted in 2 pack Jotun Jotamastic epoxy 3 coats applied and a Jotun Hardtop AX, a Polyurethane with 3 coat also being applied.
The rudder, rudder shaft, bottom cup, top bearing and tiller are all new
Four new anodes welded on
New steel seating frame on the cruiser stern and new pedestal for morse controls and Instruments to be housed.
The engine is a BMC 1.8 fully refurbished with new exhaust and engine mountings
The engine bay as been fully cleaned and epoxy painted
There are 4x100 amp leisure batteries plus starting battery
The weed hatch as been extended
All welding work as been done by our qualified welder who owns the boat who does this kind of work daily at our Marina for customers.
Even builds our new builds at Goole Marina.
The boat is on hard standing at present, so now would be
a good time to view as we are intending on putting the boat back in the water in the next 2 to 3 weeks.
The boat is at a stage that all welding and mechanical works are done, so it's basically at a sail away plus stage.
This is basically a old boat that gives peace of mind, to any potential customer, so there will be no unexpected expensive over plating jobs, as it's all been done.
The boat is at our Marina.
Work may continue daily, which could alter the price as additional work is done.

Specifications

Disclaimer

The Particulars detailed herein are intended to give a fair description of the vessel but their accuracy cannot be guaranteed, these particulars are not part of any contract or offer and are supplied on the understanding that all negotiations shall be through Goole Marina Brokerage, who are acting as brokers for the vendor.
The vendor is not selling in the course of a business unless otherwise stated, at his own expense, to employ qualified agents to carry out surveys, structural and/or mechanical and electrical.

Location Map